Baumer VLXT - Usersetsave; Usersetselector

207
V2.6 | 8/30/2022 | 1120758
7.21.5 UserSetSave
Save the User Set specied by UserSetSelector to the non-volatile memory of the device
Notice
The factory settings are stored in the user set Default. This is the only user set that can-
not be edited. Select at UserSetSelector UserSet1, UserSet2 or UserSet3.
Name UserSetSave
Category UserSetControl
Interface ICommand
Access Write only
Unit -
Values -
7.21.6 UserSetSelector
Selects the Feature User Set to load, save or congure. The factory settings are stored in
the user set Default. This is the only user set that cannot be edited.
Name UserSetSelector
Category UserSetControl
Interface IEnumeration
Access Read / Write
Unit -
Values Default Select the factory setting user set.
User Set 1 Select the User Set 1.
User Set 2 Select the User Set 2.
User Set 3 Select the User Set 3.