Baumer VLXT - Acquisitionstop; Exposureauto (≥ Release 2 Only); Exposuremode

58
V2.6 | 8/30/2022 | 1120758
7.1.9 AcquisitionStop
Stops the Acquisition of the device at the end of the current Frame.
Name AcquisitionStop
Category AcqusitionControl
Interface ICommand
Access Write only
Unit -
Values -
7.1.10 ExposureAuto(≥Release2only)
Sets the automatic exposure mode when ExposureMode is Timed. The exact algorithm
used to implement this control is device-specic.
Name ExposureAuto
Category AcqusitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Continuous
Exposure duration is constantly adapted by the device to
maximize the dynamic range.
Off
Exposure duration is user controlled using Exposure-
Time.
Once
Exposure duration is adapted once by the device. Once
it has converged, it returns to the Off state.
7.1.11 ExposureMode
Sets the operation mode of the Exposure (or shutter).
Name ExposureMode
Category AcqusitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values Timed
Timed exposure. The exposure duration time is set using the
ExposureTime or ExposureAuto features and the exposure
starts with the FrameStart or LineStart.