Baumer VLXT - Chunkenable; Chunkmodeactive; Chunkselector

80
V2.6 | 8/30/2022 | 1120758
7.5.1 ChunkEnable
Enables the inclusion of the selected chunk data in the payload of the image.
Notice
You can choose the desired chunk under Chunk Selector.
Notice
The camera must be stopped before this feature can be edited.
Name ChunkEnable
Category ChunkDataControl
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.5.2 ChunkModeActive
Activates the inclusion of chunk data in the payload of the image.
Notice
The camera must be stopped before feature can be edited.
Name ChunkModeActive
Category ChunkDataControl
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.5.3 ChunkSelector
Selects which chunk to enable or control.
Name ChunkSelector
Category ChunkDataControl
Interface IEnumeration
Access Read / Write
Unit -
Values see table below