Baumer VLXT - Memorymaxblocks; Category: Opticcontrol (≥ Release 3;.EF Only); Aperture (.EF Only); Apertureinitialize (.EF Only)

169
V2.6 | 8/30/2022 | 1120758
7.16.2 MemoryMaxBlocks
Maximum count of available memory blocks.It depends on partial scan features, pixelfor-
mat and selected acquisition format.
Name MemoryMaxBlocks
Category MemoryManagement
Interface IInteger
Access Read only
Unit -
Values 0 ... 4294967295 (Increment: 1)
7.17 Category:OpticControl(≥Release3/.EFonly)
Category for the data Optic Control features.
7.17.1 Aperture (.EF only)
Sets the aperture (also called iris, f-number, f-stop or f/#) of the lens. The lower the f/# the
more light goes through the lens (the "faster" the lens) and the smaller the depth of eld.
Name Aperture
Category OpticControl
Interface IFloat
Access Read / Write
Unit -
Values
e.g. 4.362031 ... 28.100035 (Increment:0.50)
value range depending on lens
7.17.2 ApertureInitialize (.EF only)
Initializes the aperture and makes it ready for use. The aperture position after initialization
is implementation dependent. This feature is only implemented if an additional initializa-
tion is required after OpticControllerInitialize.
Name ApertureInitialize
Category OpticControl
Interface ICommand
Access Write only
Unit -
Values -