Baumer VLXT - Category: Actioncontrol; Actiondevicekey; Actiongroupkey; Actiongroupmask

65
V2.6 | 8/30/2022 | 1120758
7.2 Category: ActionControl
Category that contains the Action control features.
7.2.1 ActionDeviceKey
Provides the device key that allows the device to check the validity of action commands.
The device internal assertion of an action signal is only authorized if the ActionDeviceKey
and the action device key value in the protocol message are equal.
Name ActionDeviceKey
Category AnalogControl
Interface IInteger
Access Write only
Unit -
Values 0 - 4294967295 (Increment: 1)
7.2.2 ActionGroupKey
Provides the key that the device will use to validate the action on reception of the action
protocol message.
Name ActionGroupKey
Category AnalogControl
Interface IInteger
Access Read / Write
Unit -
Values 0 - 4294967295 (Increment: 1)
7.2.3 ActionGroupMask
Provides the mask that the device will use to validate the action on reception of the action
protocol message.
Name ActionGroupMask
Category AnalogControl
Interface IInteger
Access Read / Write
Unit -
Values 0 - 4294967295 (Increment: 1)