Baumer VLXT - Ptpoffsetfrommaster; Ptpparentclockid; Ptpservostatus

202
V2.6 | 8/30/2022 | 1120758
7.20.4.7 PtpOffsetFromMaster
Returns the latched offset from the PTP master clock in nanoseconds.
Name PtpOffsetFromMaster
Category
TansportLayerControl → PtpControl
Interface IInteger
Access Read only
Unit ns
Values -9223372036854775808 ... 9223372036854775808 (Increment: 1)
7.20.4.8 PtpParentClockID
Returns the latched parent clock ID of the PTP device. The parent clock ID is the clock ID
of the current master clock.
Notice
Byte 0 of the IEEE ClockIdentity eld is mapped to the MSB.
Name PtpParentClockID
Category
TansportLayerControl → PtpControl
Interface IInteger
Access Read only
Unit -
Values 80-00-00-00-00-00 ... 7F-FF-FF-FF-FF-FF-FF-FF (Increment: 1)
7.20.4.9 PtpServoStatus
Notice
PTPServoStatus may change temporarily when changing the IP address.
Returns the latched state of the clock servo.
When the servo is in a locked state, the value returned is ‘Locked’. When the servo is in
a non-locked state, a device-specic value can be returned to give specic information. If
no device-specic value is available to describe the current state of the clock servo, the
value should be ‘Unknown’.
Name PtpServoStatus
Category
TansportLayerControl → PtpControl
Interface IEnumeration
Access Read only
Unit -
Values
Unknown
Locked