Baumer VLXT - Sequencermode; Sequencerpathselector; Sequencersetactive

180
V2.6 | 8/30/2022 | 1120758
7.18.4 SequencerMode
Controls if the sequencer mechanism is active.
Notice
To activate the feature, the following requirements must be accomplished:
BalanceWhiteAuto = o
SequencerCongurationMode = o
HDREnable = false
≥Release3only
When the sequencer is active (SequencerMode = on), the sequencer sets can be
loaded. Therefore the features SequencerSetSelector and SequencerSetLoad are
available. After executing the SequencerSetLoad command, the selected sequencer
set settings can be read as in sequencer conguration mode.
Name SequencerMode
Category SequencerControl
Interface IEnumeration
Access Read / Write
Unit -
Values
On Enables the sequencer.
Off Disables the sequencer.
7.18.5 SequencerPathSelector
Selects the path that contains the settings coming afterward.
Name SequencerPathSelector
Category SequencerControl
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 3 (Increment: 1)
7.18.6 SequencerSetActive
Contains the currently active sequencer set.
Name SequencerSetActive
Category SequencerControl
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 127 (Increment: 1)