Baumer VLXT - Sequencerconfigurationmode; Sequencerfeatureenable

178
V2.6 | 8/30/2022 | 1120758
Sequencerconguration
In order to avoid overwriting current camera settings while conguring a sequencer, the
camera needs to be set to the sequencer conguration mode.
Once the camera is set to the sequencer conguration mode, the individual sequencer
sets can be selected via the SequencerSetSelector, congured and saved by executing
SequencerSetSave. Sequencer Sets can also be loaded and modied.
Starting the congured sequence requires to switch the sequencer conguration mode off
and to enable the sequencer mode.
7.18.1 SequencerCongurationMode
Controls if the sequencer conguration mode is active.
Name SequencerCongurationMode
Category SequencerControl
Interface IEnumeration
Access Read / Write
Unit -
Values
On Enables the sequencer conguration mode.
Off Disables the sequencer conguration mode.
7.18.2 SequencerFeatureEnable
Enables the selected feature and make it active in all the sequencer sets.
Name SequencerFeatureEnable
Category SequencerControl
Interface IBoolean
Access Read only
Unit -
Values
true = 1 (On)
false = 0 (Off)