Baumer VLXT - Autofeatureregionreference; Autofeatureregionselector; Autofeaturewidth

75
V2.6 | 8/30/2022 | 1120758
7.4.5 AutoFeatureRegionReference
The Reference Region of interest. The Auto Feature Region is part of this region and all
Auto Feature Region features are refer to this Reference Region.
Name AutoFeatureRegionReference
Category AutoFeatureControl
Interface IEnumeration
Access Read / Write
Unit -
Values Region0 The selected Auto Feature Region refers to Region 0.
7.4.6 AutoFeatureRegionSelector
Selects the Region of interest to control. The RegionSelector feature allows devices that
are able to extract multiple regions out of an image, to congure the features of those
individual regions independently.
Name AutoFeatureRegionSelector
Category AutoFeatureControl
Interface IEnumeration
Access Read / Write
Unit -
Values
BalanceWhite-
Auto
Selected features will control the region for Balance-
WhiteAuto and ColorTransformationAuto algorithm.
Brightness-
Auto
Selected features will control the region for GainAuto
and ExposureAuto algorithm.
7.4.7 AutoFeatureWidth
Width of the selected Auto Feature Region (in pixels).
Start AutoFeature ROI
End AutoFeature ROI
Name AutoFeatureWidth
Category AutoFeatureControl
Interface IInteger
Access Read / Write
Unit -
Values see chapter „7.13.32 Width“ on page 157