74
V2.6 | 8/30/2022 | 1120758
7.4.3 AutoFeatureOffsetY
Vertical offset from the origin to the Auto Feature Region (in pixels).
End AutoFeature ROI
Name AutoFeatureOffsetY
Category AutoFeatureControl
Interface IInteger
Access Read / Write
Unit -
Values 0 - depends on set AutoFeatureHeight
7.4.4 AutoFeatureRegionMode
Controls the mode of the selected Auto Feature Region (AutoFeature ROI).
Notice
The camera must be stopped before this feature can be edited.
Name AutoFeatureRegionMode
Category AutoFeatureControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Off
All settings of the selected AutoFeature ROI are automati-
cally equal to the selected AutoFeatureRegionReference.
On
The settings of the selected AutoFeature ROI are user de-
fined. The AutoFeature is useable only if the AutoFeature
ROI fits into the AutoFeatureregionReference of the Au-
toFeature.
To Next Page
Loading...
