26 BD FACSAria User’s Guide
• Scheduled Maintenance on page 181
• Fluidics Troubleshooting on page 237
Flow Cytometer
The benchtop flow cytometer contains the major components for all three
subsystems (fluidics, optics, and electronics). The BD FACSAria cytometer is
relatively compact, with a much smaller footprint than most sorters with the
same capabilities. The cytometer can be set up on a typical laboratory benchtop
or table, and it requires only a 20-amp electrical outlet. No special facilities are
required.
Figure 1-6 BD FACSAria flow cytometer
To view the fluidics components, open the side door and lift the flow cell access
door. To view the optics components, open the optics access door. The power
panel and connectors are found on the left side of the cytometer. Other electronic
components are embedded within the cytometer and do not need user adjustment.
The flow cell access door is equipped with a shutter mechanism that shuts
off the laser light when the door is opened. To ensure there is no interruption
to data acquisition, do not open the door while sorting or recording.
side door
flow cell access door
power panel
optics access door
sample injection chamber
sort collection chamber
To Next Page
Loading...
