Becker CASCADE PRO - Page 106

106
Telephone mode
Query status option
You can use this function to request the
current settings for the call divert func-
tion.
After selecting
Query status, after a mo-
ment a message appears with the status
of the call divert function, provided a re-
quest is possible. Here you can see
whether the individual call diversions
are switched on or off and the particular
numbers to which calls may be diverted.
Divert all calls option
You can use this function to specify that
all calls are diverted to a specific phone
number.
After selecting
Divert all calls, a message
appears in which you can switch the call
divert function on/off or request the sta-
tus.
! Select from On, Off and Status.
The
Off option deactivates the call divert
function.
The
Status option shows the current sta-
tus of the call divert function.
After selecting
On, the phone number is
displayed, provided a call divert number
has already been entered.
! Select from Use, Another number and
Cancel.
By selecting
Use the call divert function
is activated. Calls are then diverted to
the phone number displayed.
By choosing
Another number, you have the
option of selecting or entering another
phone number.
! Turn the rotary control/push button
to select one of the following op-
tions:
Show last number,
Call from address book or
Enter number.
! Confirm your selection by pressing
the rotary control/ push button .
•
Show last number
This displays a list of the 4 phone
numbers used last for the call divert
function. Select the desired phone
number here.
•
Call from address book
You can select a phone number for the
call divert function from the address
book.
Note:
If the call divert function
Divert all calls
is active, all the other call diverts are ig-
nored.
5065
5066
5067