109
Telephone mode
Selecting a network
(internal phone and SIM-Access only)
You can use this function to select, manu-
ally or automatically, the mobile
phone network to which your phone is
connected.
! Call up the Settings menu.
! Select the Select network entry.
The Network menu appears.
! Turn the rotary control/push button
to select one of the following op-
tions:
Automatic network selection,
Manual network selection or
Network search.
! Confirm your selection by pressing
the rotary control/ push button .
Activating automatic network selec-
tion
If automatic network selection is active,
the Cascade automatically selects an
available network.
! Select the Automatic network selection en-
try.
! Turn the rotary control/push button
to switch the function on ( ).
After a short time, if possible, a network
is selected automatically by Cascade.
Selecting a network manually
If manual network selection is active,
you can select one of the available net-
works yourself.
! Select the Manual network selection en-
try.
This starts a search for available net-
works.
After a short time, you will be shown
a list of networks that are currently
available.
! Turn and press the rotary control/push
button to select the preferred net-
work.
5070
Note:
If you have selected a network manual-
ly, this setting is retained. If you leave
the range of the selected network, the
automatic network selection is reacti-
vated.
Notes:
• If the selected network cannot be set,
the automatic network selection is re-
activated.
• If the manual network selection is ac-
tive, you can start a new search for
currently available networks in the
Network menu by selecting
Network
search
.
5071
To Next Page
Loading...
