6-12 BMP
®
61 Label Printer
User’s Manual
110-Block, Bix Block Label Type
Figure 6-7. Sample pair configurations
3. In the Block Type field, from the drop down list, select the pair configuration to
use.
Sequence Type is used to determine how, and if, you want to serialize data. If
None is selected, the areas are blank and you can independently enter data in
each area of the strip. Horizontal increments one number per area, based on the
start value.
In Backbone serialization, the left-most area on each strip prints with two numbers.
The first number is left-justified; the second number is right justified. All other
areas print with one right-justified number.
To Next Page
Loading...
