7-12 BMP
®
61 Label Printer
User’s Manual
Replacing the Printer (Media Well) Cover
Internal Components
Program
File incompatible with installed
media
A saved file (or power off file)
was designed for media not
currently installed.
Install correct media.
Incompatible Media for chosen
application
The labels installed cannot
accommodate the application
requirements. (E.g., attempting to
run a 110-Block application on
die cut media.)
Install correct media.
Invalid terminal repeat value
entered.
The value entered is out of the
range.
The acceptable range is between
the minimum of 0.2 inch to the
maximum of 40 inches.
No applications available Applications not selected Ensure that the desired
applications are activated.
1. Press Setup.
2. Choose Apps.
3. Navigate to the desired
applications and press [OK]
to place a checkmark in front
of each application.
4. Navigate to the OK button
and press [OK].
Problem Cause Corrective Action
To Next Page
Loading...
