Brother MFC-9330CDW Service Manual

2-78
Confidential
■ Error code C700
The memory is insufficient to expand the data of PC-Print.
Error code C800
The memory used to store secure print data exceeded the memory size for secure print data.
<User Check>
- Print the print data stored in the memory.
- Divide the print data and print it.
■ Error code D100
An error occurred during modem initialization.
■ Error code D200
The machine detected that the modem PCB was disconnected.
Out of Memory
Press Stop Key
Out of Memory
Secure Print Data is full. Press Stop Key and delete the previously stored data.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable D1
See Troubleshooting and routine maintenance chapter in User's Guide.
Step Cause Remedy
1 Modem PCB failure Replace the modem PCB ASSY.
2 Main PCB failure Replace the main PCB ASSY.
Machine Error
Step Cause Remedy
1 Modem PCB harness connection
failure
Check the modem PCB harness
connection and reconnect it.
2 Modem PCB failure Replace the modem PCB ASSY.
3 Main PCB failure Replace the main PCB ASSY.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes