Brother PE-Design Next - Page 110

108
Tutorial 5-1: Using Name Drop
Step 2 Creating the list
Now, we will add text at the end of the list.
Click the cell in the row.
Use the keyboard to enter the text, and then
press the key.
Step 3 Outputting patterns using
text from the text list
Let's practice outputting the patterns to files.
Embroidery data with the text replaced by each row
of text in the list can be outputted.
Click to Folder.
Select the drive and folder (1), type the name
of the file in the File name box (2), and then
click OK (3).
 This application begins checking that
there are no errors in the embroidery
data. If no errors were detected, it begins
outputting the data.
After the data has been outputted, the
following message appears. Click OK.
An embroidery file is saved in the selected
folder for each line of text in the list.
1
2
Enter
b Memo:
The files are named “<file_name>xxx.pes”
(where “xxx” are consecutive numbers
starting with 001).
1
2
1
2
3
3
le_text.fm Page 108 Wednesday, May 26, 2010 6:53 PM