Brother PE-Design Next - Tutorial 6-3: Photo Stitch 2; Step 1 Importing Photo Data into Layout & Editing

127
Creating Embroidery Patterns Using Images
Tutorial 6-3: Photo Stitch 2
Tutorial 6-3: Photo Stitch 2
We will create an embroidery pattern with Photo Stitch 2 in a method different than that used with Photo Stitch 1.
Step 1 Importing photo data into
Layout & Editing
Select the Tutorial_6 folder, and then select
girl2-face.bmp as the image.
c
“Importing image data into Layout &
Editing” on page 119
Step 2 Starting the Photo Stitch 2
wizard
Click 1, then 2, then 3.
Step 3 Applying an image mask
and adjusting its size and
position
Click 1 to select the circle mask.
Drag handle 2 to adjust the size of the mask,
and drag the mask to adjust its position.
Click Next.
c
“Select Mask dialog box” on page 134
From this dialog box, the size and position of
the image can be adjusted. For this example,
we will simply continue to the next step.
Click Next.
c
“Check Mask Shape/Modify Image dialog
box” on page 135 and “Gray Balance /
Modify Image dialog box” on page 136
Step 1 Importing photo data into Layout & Editing
Step 2 Starting the Photo Stitch 2 wizard
Step 3 Applying an image mask and adjusting its size and position
Step 4 Changing the sewing angle
3
1
2
1
2
2
1
2
XE8656-001.book Page 127 Monday, May 24, 2010 5:44 PM