Brother PE-Design Next - Tutorial 5-2: Creating Name Drop

109
Creating Embroidery Patterns Containing Text
Tutorial 5-2: Creating Name Drop
Tutorial 5-2: Creating Name Drop
Next, let's create the following pattern and apply this attribute.
The sample file for this tutorial can be found at the following location.
Documents (My Documents)\PE-DESIGN NEXT\Tutorial\Tutorial_5
Step 1 Designing the embroidery
pattern
Click 1, then 2, then 3.
Select Misc from the Category selector, and
then drag the rainbow pattern into the Design
Page.
Click 1, then 2, then 3, and then click the
Design Page.
Type in “Fernand”, and then press the
key.
Select the text pattern (1), select the
Transform check box (2), and then click 3.
Step 1 Designing the embroidery pattern
Step 2 Creating the list
Step 3 Outputting patterns using text from the text list
1
1
2
3
2
3
1
2
3
4
Enter
5
1
2
3
le_text.fm Page 109 Thursday, May 27, 2010 8:20 PM