Brother PE-Design Next - Sew Setting Stage; Region Sewing

203
Design Center
Sew Setting Stage
Sew Setting Stage
In the Figure Handle Stage, click 1.
Setting region/line sewing
■ Region sewing
1. Click 1, then 2.
2. If necessary, change the color and sew type.
c
“Sewing attributes” on page 204
3. Click the enclosed region to apply the sewing
attributes.
b Memo:
In the Sew Setting Stage, the colors of the
Design Page and background can be
changed from the
Design Setting dialog box
(displayed by clicking
1 , then 2 ).
1
1
2
1
2
a Note:
• If the attributes cannot be applied to a
region, go back to the Figure Handle
Stage and make sure that region is
closed.
• Edit any broken lines with the Edit Point
tool.
Marching lines
XE8656-001.book Page 203 Monday, May 24, 2010 5:44 PM