112
Name Drop Feature (Replacing Text)
(3) Edit Text
Enters input mode for the text in the
selected cell. (Input mode can also be
entered by double-clicking a cell.)
(4) Select a row, and then click Insert. A new
row is inserted above the selected one.
(5) Select a row, and then click Delete. The
selected row is deleted.
■ Saving / importing a text list (CSV)
(6) Saves the created Name Drop List.
Click this button, select the drive and
folder, type the name of the file in the File
name box, and then click Save to save
the list as a .csv file.
(7) Imports a Name Drop List as a .csv file.
Click this button, select the drive and
folder, click the name of the file, and then
click Open, or double-click the file's icon.
■ Outputting patterns using text
from the text list
(8) Click to send to machines by using the
Link function. This button is available if an
embroidery machine compatible with the
Link function is connected to the
computer. Connect a compatible
embroidery machine that has been
started in Link mode.
c
“Using the Link Function to Embroider
From the Computer” on page 177
(9) To Folder
c
“Outputting patterns using text from the
text list” on page 108
■ Editing a pattern with text
replaced
(10)Select text in the Name Drop List dialog
box and click OK to return to the Design
Page and edit the pattern with the text
replaced.
b Memo:
If the pattern contains two text patterns with
the
Name Drop
attribute applied, the text list
appears as shown below.
b Memo:
Select a text pattern with the
Name Drop
attribute applied, and then click
1
, then
2
, then
3
to display the
Name Drop List
dialog box for
the selected text.
XE8656-001.book Page 112 Monday, May 24, 2010 5:44 PM
To Next Page
Loading...
