180
Using the Link Function to Embroider From the Computer
1. Select a machine in the Machine Name (1)
selector, select an embroidery file, and then
click Send (2).
The embroidery designs are moved to the
Link dialog box.
2. Repeat step 1.. to move each design to the
Link dialog box.
b Memo:
• The initial machine name is the machine's
ID.
For details, refer to the Operation Manual
provided with your embroidery machine.
• The name of the machine can be changed.
For details, refer to “Changing the
embroidery machine name appearing with
the Link function” on page 181
XE8656-001.book Page 180 Monday, May 24, 2010 5:44 PM
To Next Page
Loading...
