234
Creating Fill/Stamp Stitch Pattern
Select the drive and folder where the pattern
was saved in Step 4.
Click the edited fill/stamp stitch pattern, and
then click OK.
The pattern is applied to the inside
regions of the embroidery pattern.
b Memo:
• A fill/stamp stitch pattern can also be
applied as a stamp by using the Stamp
Tools.
c
“Applying and editing stamps” on
page 60
• For best results, refer to “Notes on
programmable fill stitches and stamps” on
page 305.
XE8656-001.book Page 234 Monday, May 24, 2010 5:44 PM
To Next Page
Loading...
