Brother PE-Design Next - Page 267

265
Font Creator
Changing the Settings
Changing the grid settings
1. Click View tab.
2. Specify the grid settings.
(1) To display the grid, select the Show Grid
check box.
(2) To display the grid as solid lines, select
the with Axes check box.
(3) In the Interval box, select the grid
spacing.
(4) To input the font in a uniform thickness or
match vertical and horizontal positions,
select the Snap to Grid check box.
b Memo:
The pointer will move by the amount set in
Interval .
The snap feature works whether or not the
grid is displayed.
(3)
(1)
(4)
(2)
XE8656-001.book Page 265 Monday, May 24, 2010 5:44 PM