Brother PE-Design Next - Page 72

70
Checking Embroidery Patterns
Changing the display of the
embroidery design
Click 1, then 2.
■ Solid View
■ Stitch View
You can display a stitch view of it in order to see how
the stitching is connected.
■ Realistic View
You can display a realistic view of it in order to see
how the design will appear once it is sewn.
b Memo:
When the rulers are displayed, click / to
switch the measurement units between
millimeters and inches.
1
2
b Memo:
If is selected under Machine Type in
the Design Setting dialog box, click 1 , then 2 ,
then
3 to view the thread trimming locations in
the Design Page.
b Memo:
Changing realistic view settings
1. Click 1, then 2, then 3.
2. If necessary, specify settings for
Thread Width (1), Contrast (2) and
Brightness (3), then click Apply.
1
2
3
1
2
3
(1)
(3)
(2)
XE8656-001.book Page 70 Monday, May 24, 2010 5:44 PM