Introduction
12 / 234 H172203_1_001
1.4 Limitation of Liability
All specifications and instructions in this manual have been compiled taking account of
applicable standards and regulations, the current state of technology and the experience and
insights we have gained over the years.
The manufacturer accepts no liability for damage due to:
• Failure to observe this manual
• Improper use
• Deployment of untrained personnel
• Unauthorized modifications
• Technical modifications
• Use of unauthorized spare parts
The actual scope of supply may differ from the explanations and depictions in this manual in
the case of special designs, take-up of additional ordering options, or as a result of the latest
technical modifications.
The undertakings agreed in the supply contract as well as the manufacturer's Terms and
Conditions and Terms of Delivery and the legal regulations applicable at the time of
conclusion of the contract shall apply.
1.5 Warranty Terms
The warranty terms are included in the manufacturer's Terms and Conditions.
1.6 Customer Service
Our customer service division is available to provide technical information. See the chapter
Contact [}221] for contact information.
In addition, our employees are always interested in acquiring new information and experience
gained from practical application; such information and experience may help improve our
products.
1.7 Product Safety and Electromagnetic Compatibility
The device complies with the following safety requirements:
• IEC 61010-1:2010+AMD1:2016
• EN 61010-1:2010
• UL 61010-1 3rd edition (2012-05-11)
• CAN/CSA-C22.2 NO. 61010-1-12 (R2017)
To Next Page
Loading...