Bruker NMR BSMS System User Manual

BSVT Introduction & Configurations
H172203_1_001 125 / 234
Sensors & Pneumatics
Magnet System Bore SPB Z115191 SPB-E Z115192
SB
( )
WB
Table12.3: Required Boards Depending on Magnet System
12.6 Basic BSVT Configuration with VT System Option
Pneumatics & Sensors Variable Power Supply
Magnet Bore SPB Z115191 SPB-E Z115192 VPSB-DC
Z139305
VPSB-DC-E
Z140144
SB
( ) ( )
WB
Table12.4: Required Boards for Basic BSVT Configuration with VT System Option
The basic VT system option includes a smart VT interface for 2 thermocouple type T sensors
(Z119237 BSMS/2 VTA TC-2T) (see also BSVT Probe Adaptation [}126]).
12.6.1 Support for Nitrogen Level Sensor
There are two generations of Nitrogen Level Sensors installed on BRUKER Magnet sys-
tems. The current version is equipped with a digital interface, whereas the former sensor
offers an analog interface. The following table shows which units provide appropriate
interfaces for these sensors.
For detailed information on nitrogen level sensor and required cables see Nitrogen Level
Sensor [}195].
VPSB-DC
Z139305
VPSB-DC-E
Z140144
SPB Z115191 SPB-E
Z115192
Digital sensor
Analog sensor
Table12.5: Support for Nitrogen Level Sensor

Bruker NMR BSMS System Specifications

General

Brand	Bruker
Model	NMR BSMS System
Category	Chassis
Language	English