BST ekr CON 100 User Manual

Remote Control (Digital Inputs)
10
ekr CON 100 – Installation and Operating Manual 115/130
10 Remote Control (Digital Inputs)
10.1 Safety Information
WARNING
Mortal danger from remote controlled movements of the actuator!
When controlling the controller remotely from an external source
(remote control inputs, external control keyboard), the actuator
carries out adjusting movements automatically. Parts of your body
could be crushed, cut or hit.
►
Make sure that no persons remain in the vicinity of the pivot /
traversing area of machine components that are positioned by
the actuator.
10.2 Digital Inputs
The digital inputs of the controller permit a remote control of the
functions using an external switch or PLC signal.
Signals that are located on the remote control inputs of
the controller block the keys on the control panel with
counter functions.
If a remote control signal is at the respective terminal of the
controller (+24V⎓), the corresponding function can no longer be
switched via the control panel.

BST ekr CON 100 Specifications

General

Brand	BST
Model	ekr CON 100
Category	Controller
Language	English