BST ekr CON 100 User Manual

13
Accessories and Spare Parts
124/130 ekr CON 100 – Installation and Operating Manual
13 Accessories and Spare Parts
13.1 Order Address
BST GmbH
Remusweg 1
D-33729 Bielefeld
Germany
Tel.: +49 (0) 521 400 70 767
E-Mail: service@bst.group
http: www.bst.group
13.2 Accessories
Pos. Order
number
Designation Utilisation
1 233 472 Supply cable 20m
Connection power supply
When using an actuator EMS21, EMS22 or ECOEMS22,
the length of the supply cable (wire cross section
0.5mm
2
must be maximum 5m.
Shorten the cable if required.
2 158 668 CAN-Bus extension 1m
Connection of sensors (CAN-Bus)
2 131 993 CAN-Bus extension 2m
3 131 994 CAN-Bus extension 5m
4 131 995 CAN-Bus extension 10m
5 168 176 Spiral cable 0.5m / 2m Connection of sensors (CAN-Bus)
6 118 447 Connection cable 3m
Connection actuator EMS18, EMS21, EMS22
For connecting the actuators EMS21 and EMS22, you
require an additional adapter cable (see pos. 9)
7 118 448 Connecting cable 5m
8 118 449 Connecting cable 10 m
9 154 374 Adapter cable Connection actuator EMS21, EMS22
10 140 932 Connecting cable 10 m Connection actuator EMS10
11 167 205 CAN bus distributor Connection of several bus participants

BST ekr CON 100 Specifications

General

Brand	BST
Model	ekr CON 100
Category	Controller
Language	English