Transport, Delivery and Storage
5
ekr CON 100 – Installation and Operating Manual 37/130
5.2 Scope of Delivery
Obtain the scope of delivery from the delivery documents or
confirmation of order.
5.3 Unpacking the Delivery
1. Check the packaging for external damage and, if necessary,
make a complaint to the supplier.
2. Carefully open the packaging.
3. Check the delivery for completeness and visible damage.
4. Store the packaging for the event that components have to be
stored or transported.
5. If components are not installed immediately, store the com-
ponents in the original packaging, see chapter Storage, page
37.
5.4 Storage
NOTICE
Damage to the system caused by incorrect storage!
►
Never store the system and its components outdoors.
►
Adhere to the following storage conditions.
The system and components must be stored as follows:
■ In a well ventilated and dry room
■ In the original packaging
■ On palettes or on a shelf to protect against moisture on the
floor
■ Protected against dust and dirt (e.g. covered with film)
For permissible ambient temperatures and humidity, see chapter
Technical Specifications, page 26.
To Next Page
Loading...
Need help?
General
