About Safety
2
ekr CON 100 – Installation and Operating Manual 13/130
2.4 Qualification of the Personnel
The qualifications required by the personnel are defined as follows:
Instructed personnel have been instructed comprehensively by
the operating company and informed about the following points:
■ Tasks assigned
■ Possible hazards when carrying out the tasks
■ Possible hazards in the event of incorrect conduct
■ Measures for avoiding the hazards
Moreover, qualified personnel have sufficient experience or
practice in the safe implementation of the tasks assigned.
Specialists are in addition in the position to deal with the follow-
ing tasks by themselves due to their training, knowledge and ex-
perience as well as knowledge in the relevant regulations:
■ Carrying out the tasks assigned to them
■ Recognizing possible hazards
■ Undertaking appropriate measures for avoiding the hazards
Specialists must only carry out tasks according to their profes-
sional training.
Qualified electricians have in addition an electrical engineering
training according to the applicable guidelines (in Germany,
DINVDE1000-10).
Moreover, all personnel must satisfy all requirements that are
derived from the following documentation or directives:
■ Operating instructions for the entire system
■ National guidelines, laws and applicable guidelines for protecting
employees, general safety at workplaces and for accident pre-
vention
To Next Page
Loading...
Need help?
General
