BST ekr CON 100 User Manual

5
Transport, Delivery and Storage
36/130 ekr CON 100 – Installation and Operating Manual
5 Transport, Delivery and Storage
5.1 Transport
WARNING
Danger of death and material damage caused by incorrect
transportation!
Death and crushing from goods being transported falling.
►
The lifting gear must not be fixed on the handles.
►
Never stand under the suspended goods being transported.
►
Never stand in the area of movement of the goods being
transported.
►
Transport to be carried out by qualified and trained personnel
only.
CAUTION
Risk of injury from carrying weight being too high!
►
Lift maximum 15kg (females) or 25kg (males) per person.
►
Use handles.
The following personal protective equipment is required for
transporting:
■ Safety gloves
■ Safety shoes
■ Safety helmet when using lifting gear
►
Observe the applicable guidelines (e.g. accident prevention
regulations).
►
Wear personal protective equipment.
►
Use only suitable lifting gear (e.g. lifting straps, chains) and
lifting devices according to the type and weight of the goods to
be transported.
►
Attach the lifting gear only at the intended fixing points and
only when using suitable slings. Lifting gears must not be fixed
on handles.
►
Attach the lifting gear in such a way that the lifting force at the
fixing point only operates in a vertical direction. If necessary,
use a lifting device with a cross beam, see figure.
►
Secure the bearing ropes so that they cannot slip.
►
Transport the system components only in the original packaging
and in the position marked on the packaging.
►
If transport restraints have been supplied, always transport the
system components using transport restraints.
►
Secure the goods to be transported on the transport device so
that they cannot slip, fall-over, knock or fall down, e.g. using
lashing straps and edge protectors.
►
Lift and put the transport goods down carefully.

BST ekr CON 100 Specifications

General

Brand	BST
Model	ekr CON 100
Category	Controller
Language	English