BST ekr CON 100 User Manual

9
Operation
108/130 ekr CON 100 – Installation and Operating Manual
9.12 Displaying System Information
This service display shows the hardware, firmware and bootloader
versions installed on the controller.
Fig.50: Display of the system information (example)
① Firmware version ③ Bootloader version
② Hardware version
If you have a service query for our customer services,
please have the installed hardware and firmware versions
to hand.
Calling up the service display
1. Activate the service display System information in the setup
menu (see Calling up the Setup Menu, page 106).
The hardware, firmware and bootloader versions installed for
the controller are shown in the display.
2. Press the ENTER key to quit the service display.
The operation screen is displayed.
After a pre-set time (Timeout) has elapsed, the service
display is automatically quit. The operation screen is
displayed.

BST ekr CON 100 Specifications

General

Brand	BST
Model	ekr CON 100
Category	Controller
Language	English