EasyManuals Logo

BST ekr CON 100 User Manual

BST ekr CON 100
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
About Safety
2
ekr CON 100 – Installation and Operating Manual 9/130
2 About Safety
The system has been designed according to the state of the art
and fulfils the latest safety standards.
When using the system, risks may occur that could threaten your
life or health or lead to material damage. In order to avoid these
risks, all instructions in this manual concerning safety and all
relevant documentation of the entire system must be observed.
2.1 Intended Use
The system is only determined for web guiding. It permits guiding
according to the web edges, web center-line, printed lines or
contrast edges.
The system is integrated in a machine or connected with another
machine to form a machine as defined by machinery directive
2006/42/EC. All machines and the overall machine line must meet
the requirements of the machinery directive after integration of
the system.
The system and all of its components are exclusively intended for
commercial use in an industrial environment.
Moreover, the system may only be started up, if the following
regulations are adhered to:
The product must only be installed or operated in a non-
explosive atmosphere.
The product and all components may only be used while in
perfect condition.
All safety devices must be in perfect condition.
The product may only be operated with the components
belonging to the system. The only third-party components
exempt from the above are those supplied by BST or explicitly
approved for use with the system.
Parts that are not in perfect condition must immediately be
replaced with original spare parts.
All work on or with the product may only be performed by in-
structed and qualified personnel, see chapter Qualification of
the Personnel, page 13.
Always adhere to this operating manual and all safety instruc-
tions.
The operating conditions and performance limits indicated in
the technical data must be observed.
2.2 Non-intended Use
Every use is non-intended, that is not described in the chapter
Intended Use or does not comply with the guidelines specified
there, see Intended Use, page 9.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BST ekr CON 100 and is the answer not in the manual?

BST ekr CON 100 Specifications

General IconGeneral
BrandBST
Modelekr CON 100
CategoryController
LanguageEnglish

Related product manuals