BST ekr CON 100 User Manual

Commissioning
8
ekr CON 100 – Installation and Operating Manual 61/130
8 Commissioning
8.1 Safety Instructions
WARNING
Danger of death and material damage caused by incorrect com-
missioning!
►
Have the commissioning carried out by BST service personnel or
authorized personnel only.
DANGER
Danger of death caused by the machine starting up!
Parts of your body could be crushed, cut, drawn in or hit.
►
Switch off the machine completely and secure it against it being
switched back on.
DANGER
Danger of death from electric shock!
Life threatening injuries caused by incomplete switching off or
residual current.
►
Electrically isolate the controller.
►
Secure the power supply against being switched back on.
►
Check that the unit is voltage-free.
►
Earth the controller.
►
Cover or fence off any adjacent parts that are still live.
►
Open the housing of the controller only at zero potential.
WARNING
Danger of death from actuator movements!
During function tests, parts of your body may be crushed, cut or
hit.
►
Before starting the commissioning work, make sure that no per-
sons are in the vicinity of the pivot / traversing area of machine
components that are positioned by the actuator (e.g. pivoting
frame guide, swiveling roller guide, rewind, unwind).
►
Cordon off the work area before starting the commissioning
work to prevent access by unauthorized persons.
NOTICE
Damage to the actuator when operating with transport safety
device fitted!
►
Before commissioning, remove the transport safety device on
the actuator and guiding device.

BST ekr CON 100 Specifications

General

Brand	BST
Model	ekr CON 100
Category	Controller
Language	English