MVX250i E, MVX200i E, MVX200 E
GENERAL DESCRIPTION OF PRODUCT
26
6-2-2 Audio Dubbing signal input Audio signal from LINE (AV terminal) or microphone (external > internal). MVX200i E has no
external microphone terminal. MVX200 E has no external microphone terminal and line in
function.
6-2-3 Switching to Audio Dubbing Press audio dubbing button on remote control while playback is paused.
6-3 Playback functions Standard Playback and Superb Playback
6-3-1 Standard Playback
a. Video Video recorded in SP and LP modes
b. Audio 16-bit Supports the following sampling frequencies : 48 kHz, 44.1 kHz, 32 kHz.
12-bit Sampling frequency : 32 kHz
Stereo 1, Stereo 2, or mixed playback of Stereo 1 and Stereo 2 (variable mix ratio)
6-3-2 Special Playback Plays video only
a. Still image playback Pure frame playback
b. Fast-forward playback Approx. 11.5× speed.
c. Rewind playback Approx. 11.5× speed.
d. Frame playback Forward/reverse frame feeding
e. Slow playback Forward/reverse 1/3× speed
f. 1× SP playback Forward/reverse 1× speed
g. 2× SP playback Forward/reverse 2× speed
6-4 Tape fast-forward / rewind time Approx. 2 minutes and 20 seconds (using 60-minute tape)
6-5 Search
6-5-1 Date search If there is more than one recording date, this function cue up to the position where the date
changes. Forward/reverse date search (use the / keys on the remote control after select-
ing Date search with the remote control Search Select key)
Search can be set for up to 10 images before or after the current position.
6-5-4 Index search None
6-5-5 End search When a tape is played back upon completion of the shooting, this function transports the tape to
the position where the shooting last ended, it cues to the end of the shooting on the tape, and then
places the tape in the stop mode. Furthermore, when an end search is being performed, the tape
is played back starting about 4 seconds before the end of the shooting, enabling the image imme-
diately before the end to be checked. However, this function does not work when the tape has
been removed after shooting.
6-6 Input signals
6-6-1 DV terminal SD format signals complying with IEEE1394– AV / C protocol (MVX250i E, MVX200i E only)
6-6-2 AV terminal (MVX250i E, MVX200i E only)
a. Video signals
Types of signals PAL standard color video signals
Impedance 75 Ω
Signal level 1Vp-p (composite)
b. Audio signals
Types of signals Stereo audio signals
Impedance Min. 40 kΩ
Signal level −10dBv
6-6-3 S Video terminal (MVX250i E, MVX200i E only)
Signal configuration PAL Y/C separated video signal
Impedance 75 Ω
Signal level 0.3Vp-p (color burst signal)
6-6-4 Microphone terminal Included. (MVX250i E only)
6-6-5 USB terminal Supports USB 2.0 FullSpeed class.
6-7 Output signals (MVX250i E only)
6-7-1 DV terminal SD format signals complying with IEEE1394-AV/C protocol
6-7-2 AV terminal
a. Video signals
Types of signals PAL standard color video signals
Impedance 75 Ω
Signal level 1 Vp-p (composite)
Horizontal resolution
Self-recording/playback Approx. 530 TV lines (screen center)
Camera EE OUT Max. approx. 530 TV lines (screen center)
To Next Page
Loading...
