Note
•
If the Home screen does not appear, tap the HOME button.
•
2.
Tap paper feed slot where roll paper for which you want to set cutting method is loaded.
2.
3.
Tap Paper settings.
3.
4. Tap Advanced.4.
5. Tap Cutting mode.5.
6. Tap User cut.6.
7. When Do you want to set to detect the leading edge of the paper? is displayed, select7.
Detect (recommended).
8.
Print the job.
8.
The printer stops advancing the paper after printing.
9. Tap Advance paper.9.
Roll paper is fed to the specified cut position and then automatically stopped.
10.
Cut the roll paper manually with scissors or the like.
10.
141
To Next Page
Loading...
