Stand
The following Stand can be used with the printer.
• TX-2100 / TX-5210 : Printer Stand SD-21•
The TX-4100, TX-3100, TX-5410, TX-5310 models come with the stand included.
For more information on the main parts of the stand, see "Stand Parts".
Important
• When moving the stand, be sure to set the locking caster lock to the OFF position to release the lock.•
If you move it while the locking caster are locked, the floor may become scratched.
Note
• For instructions on installing the stand, see the Setup Guide provided with the stand.•
53
To Next Page
Loading...
