Paper src
Specifies the paper type (sheet or roll) for HP-GL/2 data printing.
This setting item is displayed by tapping in the following order.
Printer settings > Print settings > HP-GL/2 print settings > Paper settings
• Auto select (Initial setting)•
Select an appropriate paper source automatically.
• Roll paper (auto)•
Select a roll paper source (upper or lower) automatically.
• Roll paper 1•
Select this setting to print on the upper roll paper.
• Roll paper 2•
Select this setting to print on the lower roll paper.
• Manual•
Select this setting to print on the sheets.
278
To Next Page
Loading...
