Canon TX-4100 - Lines or Images Are Missing in Printed HP-GL;2 Jobs

Lines or images are missing in printed HP-GL/2 jobs.
Check 1
Is the memory full?
Check the size of the data in the print job.
Check 2
Is the printer receiving an HP-GL/2 command not supported by this printer?
Check the print job and settings.
Check 3
Has the printer received print data that includes HP RTL commands when
Auto rotation is ON?
Set Auto rotation to OFF in the touch screen menu and print again.
Print settings
Check 4
Make sure the plotter origin is correct.
Check the printing commands.
Set Detect image size to Command priority or Detected size in the touch screen menu.
Print settings
Check 5
Is Oversize set to Disable?
Set Oversize to Enable in the touch screen menu.
Print settings
841