Canon TX-4100 - Connecting Smartphone;Tablet to Printer Via Wireless Router

Connecting Smartphone/Tablet to Printer via Wireless Router
You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.
• Wi-Fi connection (connecting devices via a wireless router)
• Wireless Direct connection (connecting devices without using a wireless router)
This section describes Wi-Fi connection via a wireless router.
Follow the procedure below to connect via a wireless router.
1. Enable Printer's Wi-Fi connection1.
2. Connect Smartphones and Tablets to the Printer2.
Important
• Check the usage restrictions and change the printer LAN setting.•
Restrictions
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
Enable Printer's Wi-Fi connection
1. Flick HOME screen and tap LAN settings.1.
Home Screen Menu Composition
2.
Tap Wi-Fi.
2.
3. Check Enable is displayed in Connection.3.
If Connection is displayed as Disable, follow the steps below to enable Wi-Fi.
1.
Tap Settings.
1.
2.
Tap Enable/disable Wi-Fi.
2.
3.
Tap Enable.
3.
The printer's Wi-Fi is enabled and you can connect the Wi-Fi you connected previously.
Connect Smartphones and Tablets to the Printer
For Android device
For iOS device
For Android device
1.
Open "Settings" menu on your device.
1.
379