Canon TX-4100 - Selecting Feed Amount Adjustment Method

Selecting Feed Amount Adjustment Method
There are two methods of adjusting the paper feed amount, Prioritize print quality and Prioritize length
accuracy, either of which will be applied during printing.
Since the method that is applied during printing is determined from the value of the Set priority setting,
configure Set priority to match the print target.
Follow the procedure below to perform settings.
1.
Flick HOME screen and tap Maintenance.
1.
Home Screen Menu Composition
2.
Tap Paper feed adjustment.
2.
3.
Tap Set priority.
3.
4.
Tap paper to adjust.
4.
5. Tap setting.5.
Auto
Prioritize print quality or Prioritize length accuracy is automatically selected depending on the
settings selected in the printer driver.
Prioritize print quality
Adjusts the feed amount to reduce banding across the sheet in printed documents. Adjust print
quality settings are applied.
When Paper feed fine adjustment is executed, the Paper feed fine adjustment settings are
applied in addition to the Adjust print quality settings.
Prioritize length accuracy
Adjusts the feed amount for better accuracy of lines in printed documents. The value of Change
adjustment values in Adjust feed length is applied.
6.
Tap OK.
6.
432