Canon TX-4100 - Setting the Print Quality Level (Custom)

Setting the Print Quality Level (Custom)
The print quality level can be set in the Custom.
The procedure for setting the print quality level is as follows:
1. Select Quality & Media from the pop-up menu on the Print Dialog1.
2.
Select the print quality
2.
Select Custom for Print Quality.
Important
• If Auto (Use Printer Settings) is selected for Media Type, Custom cannot be selected.
3.
Setting the print quality level
3.
Move the Quality slider to select the print quality level.
Important
•
Certain print quality levels cannot be selected depending on the settings of media type.
4.
Complete the setup
4.
Click Print.
When you execute print, the image data is printed with the selected print quality level.
581