Canon TX-4100 - Page 235

NTP server address
Polling interval
Spanning tree settings
Enable / Disable*
LPR protocol settings
Enable* / Disable
RAW protocol
ON* / OFF
LLMNR
ON* / OFF
Gigabit Ethernet settings
Autonegotiation* / 10 Mbps half duplex / 10 Mbps full duplex / 100 Mbps half duplex / 100 Mbps
full duplex / 1 Gbps full duplex
Use Dedicated Port
ON* / OFF
IPP settings
Enable/disable IPP
Enable* / Disable
Security Print
Enable* / Disable
Wi-Fi DRX settings
Enable* / Disable
Wired LAN DRX settings
Enable* / Disable
Reset SSL certificates
Reset LAN settings
235