Important
• The following character restrictions apply to the password:•
Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
8.
Tap Apply.
8.
9.
Enter administrator password you specified again.
9.
10.
Tap Apply.
10.
The administrator password is enabled.
When You Want to Disable the Administrator Password:
When the administrator password is enabled, tapping Printer settings, Security settings and
Administrator password settings in this order and entering the administrator password displays
Change administrator password and Remove administrator password on the touch screen. Select
either item and follow the on-screen instructions to perform settings.
268
To Next Page
Loading...
