Note
• You can add the certificate by selecting the same certificate on Keychain Access. Check the
name of certification to add after selecting View Certificates.
6. Check certificate.6.
Make sure the fingerprint of certificate shown on Details corresponds with the root certificate
thumbprint of the printer.
The printer's thumbprint is displayed in Root cert. thumbprint (SHA-1) column or Root cert.
thumbprint (SHA-256) column when tapped in the following order.
(Printer information) > System information
7.
Select Always Trust.
7.
If the fingerprint of certificate detail information matches printer's thumbprint, display information on
certificate from the menu or by double-clicking the certificate, and select Always Trust on Trust.
The root certificate has been registered.
Note
•
Entering the password may be required if you specify it for your printer.
362
To Next Page
Loading...
