Canon TX-4100 - Page 364

Note
• If you specify the administrator password, enter the password.
3. Select Security.3.
4. Select SSL/TLS settings.4.
5.
Select Generate key and certificate.
5.
6.
Select Generate self-signed cert.
6.
7.
Specify each setting item.
7.
•
Signature algorithm
•
Select SHA256.
• Public key length (bits)•
Select 2048 bits.
• Specify the expiration date.•
Enter the date you generated the server certificate on Valid from.
Enter the date the server certificate expires on Valid to.
• Enter the common name.•
On Common name, enter the IPv6 link-local address you checked in abbreviated form.
Note
• When you enter the common name, add [ ] to each end of the abbreviation value of the
printer's IPv6 address.
• Do not use a comma or make a space for the common name.
8.
Select Next.
8.
You need not enter anything on Country, State or province, Locality, Organization, or
Organizational unit.
9.
Select Generate.
9.
The server certificate starts to be generated.
When the server certificate has been generated, Generated a self-signed certificate. appears.
10.
Select Restart LAN.
10.
LAN will be restarted.
When LAN has been restarted, Printer status on Remote UI appears.
Note
•
If you cannot access to Remote UI after you restart LAN, reload your web browser.
364