Canon TX-4100 - Page 401

Security Setting Security setting No Auth No Priv/Auth No Priv/Auto Priv
Authority Algorithm Authority algorithm Null/MD5/SHA1
Encryption Algorithm Encryption algorithm Null/AES/DES
User4 User 4 -
User Name User name XXXXXXXX (up to 32 characters)
Use SNMPv3 Use SNMPv3 On/Off
MIB Access Restriction MIB access restriction Disable/Read Only/Read Write
Security Setting Security setting No Auth No Priv/Auth No Priv/Auto Priv
Authority Algorithm Authority algorithm Null/MD5/SHA1
Encryption Algorithm Encryption algorithm Null/AES/DES
User5 User 5 -
User Name User name XXXXXXXX (up to 32 characters)
Use SNMPv3 Use SNMPv3 On/Off
MIB Access Restriction MIB access restriction Disable/Read Only/Read Write
Security Setting Security setting No Auth No Priv/Auth No Priv/Auto Priv
Authority Algorithm Authority algorithm Null/MD5/SHA1
Encryption Algorithm Encryption algorithm Null/AES/DES
Dynamic DNS Setting Dynamic DNS setting -
IPv4 IPv4 -
Use Dynamic DNS Operation status of Dynamic DNS On/Off
Host Name Host name XXXXXXXX (up to 64 characters)
Domain Name Domain name XXXXXXXX (up to 254 characters)
IPv6 IPv6 -
Use Manual Address DNS dynamic setting of manual address On/Off
Use Stateless Address DNS dynamic setting of stateless address On/Off
Use Stateful Address DNS dynamic setting of stateful address On/Off
Use Name As IPv4 Use same host name/domain name as that
used for IPv4
On/Off
Host Name Host name XXXXXXXX (up to 64 characters)
Domain Name Domain name XXXXXXXX (up to 254 characters)
401