drag the slider toward the right and darker as you drag the slider toward the left. You can also directly
enter brightness values that are linked to the slider bar. Enter a value in the range from -50 to 50.
Contrast
The Contrast function changes the differences between light and dark in images during printing.
To make the differences between the light and dark portions of images greater and more distinct,
increase the contrast. On the other hand, to make the differences between the light and dark portions of
images smaller and less distinct, reduce the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Important
• When Monochrome or Monochrome Bitmap is selected in Color Mode under Quality & Media, the
color balance (Cyan, Magenta, Yellow) are unavailable.
• If Monochrome Bitmap is selected for Color Mode in Quality & Media, Brightness and Contrast
cannot be set.
• If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow),
Brightness, and Contrast appear grayed out and are unavailable.
Related Topics
Specifying Color Correction
Adjusting Color Balance
Adjusting Brightness
Adjusting Contrast
690
To Next Page
Loading...
