HP-GL/2 jobs are printed in monochrome (or color)
Printed colors of lines are inaccurate during HP-GL/2 printing
HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 printing takes a long time
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Other Problems
Printer does not turn on
If the Printer Makes a Strange Sound
Messages advising to check the maintenance cartridge are not cleared
Printer consumes a lot of ink
Printed pages are not collected cleanly in the basket
Basket Lurches
When Trim edge first is set, the trimmed paper is drawn into the roll unit
Ink Level Detection
Media Type Selection does not Match Loaded Media Type
738
To Next Page
Loading...
